* Free shipping to North America and most of Europe for orders of $100 or more
ID MBDV Series mini Low-voltage DC Servo Drives
MBDV Series mini Low-voltage DC Servo Drives is a new generation of universal DC input servo system, the power range is 30W.
● 24-48V wide voltage input ● Suitable for 30W (20 base) low-voltage servo motor ● Gain parameter free setting, automatic setting, easy debugging ● Drive over-current, over-voltage, over-temperature protection ● Low energy consumption design
Brand Name: MOONS'
Payment Methods
Buyer Protection:
Free Exchange 
■ Servo Drive Numbering
■ Servo Drive Specification
| Drive Model | Output Power (W) | Rated Voltage (VDC) | Control Mode | I/O | Encoder Feedback | ||
|---|---|---|---|---|---|---|---|
| Digital Signal | Analog Signal | Pulse Signal | |||||
| MBDV-56A0RC-H01 | 60 | 24 | CANopen&RS485 | 3 Inputs/2 Outputs | — | Support collector differential pulse input | 16-bit incremental magnetic encoder |
| MBDV-56A0EC-H01 | 60 | 24 | EtherCAT | 5 Inputs/2 Outputs | — | — | 16-bit incremental magnetic encoder |
| MBDV-2X-510AEC-H01 | 100 | 24 | EtherCAT | 2 Inputs/3 Outputs | 1x(0-5V) | — | 16-bit incremental magnetic encoder |
* Multi-axis all-in-one actuator is a description of a single axis
■ Servo Drive Features
◆ Ultra-compact single-axis and 2-in-1 design
◆ PUSH-IN Connector, easy wiring
◆ Automatic adjustment, Easy Tuning
◆ Support EtherCAT、CANopen、RS485 bus control
◆ Over current, Over voltage, Over temperature Protection
■ Servo Drive Interface Description
□ MBDV-56A0EC-H01
□ MBDV-56A0RC-H01
□ MBDV-2X-510AEC-H01
■ Accessory
| Drive Power Cable (For MBDV-56A0EC-H01, MBDV-56A0RC-H01) Standard Accessories 1675-0200 |
|---|
| Model | LengthL(mm) | Description | Outline |
|---|---|---|---|
| 1675-0200 | 2000±20 | Drive Power Cable |  |
| 1675-0500 | 5000±20 | Drive Power Cable |
| Motor Power Extension Cable (MBDV-2X-510AEC-H01) |
|---|
| Model | LengthL(mm) | Description | Outline |
|---|---|---|---|
| 2656-0050-C10 | 500±20 | Motor Power Extension Cable Flexible |  |
| 2656-0100-C10 | 1000±20 | ||
| 2656-0300-C10 | 3000±20 | ||
| 2656-0500-C10 | 5000±20 |
| Motor Power Exension Cable (For MBDV-56A0EC-H01, MBDV-56A0RC-H01) |
|---|
| Model | Length L(mm) | Description | Outline |
|---|---|---|---|
| 2666-0100-C10 | 1000±20 | Motor Power Extension Cable Flexible |  |
| 2666-0300-C10 | 3000±20 | ||
| 2666-0500-C10 | 5000±20 |
| Motor Encoder Exension Cable (For MBDV-56A0EC-H01, MBDV-56A0RC-H01, MBDV-2X-510AEC-H01) |
|---|
| Model | Length L(mm) | Description | Outline |
|---|---|---|---|
| 2657-0050-C10 | 500±20 | Motor Encoder Extension Cable Flexible |  |
| 2657-0100-C10 | 1000±20 | ||
| 2657-0300-C10 | 3000±20 | ||
| 2657-0500-C10 | 5000±20 |
■ Drive Specification -MBDV-56A0RC-H01
| Environment | Temperature | Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location) Storage temperature: -40°C ~70°C | |
|---|---|---|---|
| Humidity | Both operating and storage : 10 ~ 85%RH or less | ||
| Altitude | Below 1000m, if above 1000m, the rating should be reduced | ||
| Vibration | Below 9.8m/s2, 10 - 60Hz ( Unsustainable use at resonance point) | ||
| Encoder Feedback | 16-bit Incremental magnetic encoder | ||
| I/O | Digital Signal | Input | 3 optocoupler isolation, XCOM, support PNP, NPN connection, 24VDC, maximum pulse frequency 5KHz |
| Output | 2 optocoupler isolation, YCOM, support NPN or PNP connection mode, Max.current 100mA@30V, maximum pulse frequency 1KHz | ||
| Pulse Signal | Input | 24V open collector pulse signal, minimum pulse width 1 μs, maximum pulse frequency 500KHz 5V single-ended/differential low-speed pulse signal, minimum pulse width 250ns, maximum pulse frequency 2MHz | |
| Communication | USB | Connection with PC for configuration | |
| RS-485 | Modbus/RTU Protocol | ||
| CANopen | CANopen protocol | ||
| LED Display | Red, Green LED | ||
| Protection | Over Current, Over Voltage, Low Voltage, Over Temperature,Bad Encoder Feedback,Over Speed, Position Error, Over Load, Emergency Stop, CW/CCW Limit, Communication Abnormal | ||
| Dynamic Brake | Built in | ||
■ Drive Specification -MBDV-56A0EC-H01
| Environment | Temperature | Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location) Storage temperature: -40°C ~70°C | |
|---|---|---|---|
| Humidity | Both operating and storage : 10 ~ 85%RH or less | ||
| Altitude | Below 1000m, if above 1000m, the rating should be reduced | ||
| Vibration | Below 9.8m/s2, 10 - 60Hz (Unsustainable use at resonance point) | ||
| Encoder Feedback | 16-bit Incremental magnetic encoder | ||
| I/O | Digital Signal | Input | 3 optocoupler isolation, XCOM, support PNP, NPN connection, 24VDC, maximum pulse frequency 5KHz |
| Output | 2 optocoupler isolation, YCOM, support NPN or PNP connection mode, Max.current 100mA@30V, maximum pulse frequency 1KHz | ||
| Communication | USB | Connection with PC for configuration | |
| EtherCAT | EtherCAT protocol | ||
| LED Display | Red, Green LED | ||
| Protection | Over Current, Over Voltage, Low Voltage, Over Temperature,Bad Encoder Feedback,Over Speed, Position Error, Over Load, Emergency Stop, CW/CCW Limit, Communication Abnormal | ||
| Dynamic Brake | Built in | ||
Note: EtherCAT Type Drive, X3 (RC, X5 port) supports Touch Probe1 function and can use high-speed input optocoupler.
■ Drive Specification -MBDV-2X-510AEC-H01
| Environment | Temperature | Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location) Storage temperature: -40°C ~70°C | |
|---|---|---|---|
| Humidity | Both operating and storage : 10 ~ 85%RH or less | ||
| Altitude | Below 1000m, if above 1000m, the rating should be reduced | ||
| Vibration | Below 9.8m/s2, 10 - 60Hz (Unsustainable use at resonance point) | ||
| Encoder Feedback | 16-bit Incremental magnetic encoder (SPI Communication) | ||
| I/O | Digital Signal | Input | 2 digital signal input: X1, X2:Opto-isolation, single-ended input, supports NPN connection, 24 VDC, minimum pulse width 50μs, Maximum pulse frequency 5kHz |
| Output | 3 digital signal output Y1, Y2, Y3: Optoelectronic isolation, open collector, maximum withstand voltage 30V, maximum current 1A, maximum pulse frequency 1kHz | ||
| Analog Signal | Input | 1 analog input: 0~5V, resolution 12bit | |
| Communication | USB Mini | Connection with PC for configuration | |
| EtherCAT | EtherCAT Protocol: Double row 6-pin plug-in connector EtherCAT communication | ||
| LED Display | Red, Green LED | ||
| Protection | Over Current, Over Voltage, Low Voltage, Over Temperature,Bad Encoder Feedback,Over Speed, Position Error, Over Load, Emergency Stop, CW/CCW Limit, Communication Abnormal | ||
| Dynamic Brake | Built in | ||
| Compare | Item | Price (USD) |
|---|---|---|
|
|
MBDV-56A0EC-H01 | |
|
|
MBDV-56A0RC-H01 | |
|
|
MBDV-2X-510AEC-H01 |
■ Servo Drive Dimensions (Unit: mm)
□MBDV-56A0EC-H01
□ MBDV-56A0RC-H01
□MBDV-2X-510AEC-H01
2D Drawings
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| MBDV-56A0EC-H01.pdf | 313 | ||
| MBDV-56A0RC-H01.pdf | 328 | ||
| MBDV-2X-510AEC-H01.pdf | 239 |
3D Model
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| MBDV-2X-510AEC-H01.stp | STEP | 12949 | |
| MBDV-56A0EC-H01.stp | STEP | 10472 | |
| MBDV-56A0RC-H01.stp | STEP | 6625 |
Catalog
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| MBDV-miniLow voltage DC Servo System-EN20240802.pdf | 4089 |
Filter By Product Type
All ProductsRegen Clamp
Adapter
Servo Motors
Delivery & Packaging
Ensure your ordered products are always safely packaged from easy click to fast delivery to your handsProfessional Product Label
Considering all possible harsh application environments, MOONS' specially designed labels for each product, which pass water-resistance test, durability rub test, high temperature resistance and corrosion resistance tests.Besides, our product labels are attached with QR code linking to product details, which is convenient for clients to view the detail product page with their mobile phones.
Note: This label design is suitable for products of stepper motor.
(Professional packing box and unique appearance design)
(Single item packed with EPE)
(Multi-products packed with another box)
Safely Packaging
In order to ensure your shipments withstand the long trip and arrive safely and intact, MOONS' specially designed Individual package to pass the drop test with its stable structure.Besides，the package is made from recyclable materials, providing you with professional safety delivery.
Whether just single item or multi-products the clients buy, all products are packed twice to avoid the damage further.
Shipping Visualization
For each case, products are carefully packed by experienced warehouse staff and the key processes are recorded by photos, which are then posted on our website, so that clients could clearly know the packing process and logistics status after placing order.
(Product in the box)
(Add the invoice)
(Label the commodity)
(The logistics waybill attached)
Fast Delivery
Fast Cross-Border DeliveryMOONS' chooses DHL as our main international express shipping partner. As the world's leading logistics specialist, DHL provides our customers with fast and professional inter- national door-to-door delivery service.
Estimated Delivery Time: e.g. China-USA major cities 3 business days.
Professional
Warehouse Management
