Skip to content Skip to navigation menu

M54S-23A0ECN

 
220V AC input servo drive, rated current 3A, peak current 12A, 6DI, 3DO, 1AI, with 14pin push-in spring I/O connector, support position control mode,velocity control mode, torque control mode, Q Program, EtherCAT, matching SM3 series 50W, 100W, 200W, 400W AC servo motor, built-in dynamic brake, no STO.
● 220V AC input
● High Power Density and Compact Design
● Velocity Loop Bandwidth up to 3.2KHz
● Various of Control Mode
● Efficient Auto-tuning
● Super Command Tracking
● External Disturbance Compensation
● Notch Filters
● Friendly Software
Brand Name: MOONS'
Quantity:
Shipping to:
Lead Time: Contact
customer service

* Free shipping to North America and most of Europe for orders of $100 or more

Add to compare
Payment Methods

Buyer Protection:
Free Exchange if the item has quality problems within 1 year. Learn more
Parameter Unit Value
Supply Voltage 200~240VAC
Main Circuit 200~240VAC ±10%,50/60Hz Single
Control Circuit 200~240VAC ±10%,50/60Hz Single
Output Current, Continuous A 3
Output Current, Peak A 12
Related Motor Output Power 50W
100W
200W
400W
Digital Signal Input 6 Configurable optically isolate digital general inputs
Digital Signal Output 3 Configurable optically isolate digital general outputs
Analog Signal Input 1 Analog input
Analog Signal Output NO
Pulse Signal Input NO
Pulse Signal Output NO
Encoder Output NO
Communication Ports USB
EtherCAT
Front Panel 5 keys(MODE
RIGHT
UP
DOWN
SET)
Internal Regeneration Resistor NO
Dynamic Brake YES
STO NO
Full Closed Loop NO
Connector Type 14pin push-in spring I/O connector
Control Modes PP
PV
TQ
CSP
CSV
CST
HM
Q Programming
Control Signal Input Alarm Reset
CW/CCW Limit
Gain Select
Zero Speed Clamp
Emergency Stop
CW/CCW Torque Limit
Speed Limit
General Purpose Input
Control Signal Output Warning Output
Fault Output
Servo Ready
Velocity Reached
Torque Reached
Position Reached
Servo-on Status
Brake Release
Dynamic Position Error Following
Positioning Complete
Zero Speed Detected
Velocity Coincidence
Torque Coincidence
Velocity limit
Torque limit
Homing Finished
Soft Limit CW/CCW
General Purpose Output
Encoder Feedback YES
Operating temperature Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C,please install the drive in a well-ventilated location),Storage temperature: -20°C ~ 65°C
Humidity Both operating and storage : 10 to 85%RH or less
Altitude Derating is not required for altitudes not higher than 1000m
Derating 1% for every additional 100m for altitudes between 1000m and 2000m
IP Rating IP20
Protection Over Current
Over Voltage
Under Voltage
Over Temperature
Bad Encoder Feedback
Over Load
Over Speed
Positon Error
CW/CCW Limit
Certification RoHS
CE
Weight kg 1