Skip to content Skip to navigation menu
English / 日本語 / 中文 /
NEMA17 NEMA23 NEMA11 NEMA 8 NEMA14 NEMA 24 NEMA 34 0-10V DALI
  1. Home
  2. Z417-Zero Detent Torque Motor - MOONS'

Zero Detent Torque Motor

Z417 - EXTREMELY ACCURATE AND SMOOTH

• NEMA 17, 0.9° Step Angle
• Virtually Zero Detent Torque
• High Step Accuracy
• Reduced Resonance
• Up to 28 oz-in (0.20 N-m) Holding Torque Contact Us for More

    Features

    A conventional hybrid stepper motor utilizes a permanent magnet in the rotor. Our patented design uses a ring magnet in the stator instead. This drastically reduces the detent torque (unenergized drag torque) because the magnetic flux path is able to reach over the stator windings and only go through the outer edge of the rotor. Reducing detent torque improves accuracy, smooth operation and reduces noise. Best of all, modifying the magnet location does not change the dynamic torque.

    · Extreme Step Accuracy

    Z-Series motor maintains ±1.5 arc minutes error under 64x microstepping. Industry average can range from ±4.5 to ±18 arc minutes in 0.9° step motors. Extreme Step Accuracy

    · Quiet Operation

    By eliminating detent torque, the motor operates substantially quieter than regular hybrid stepper motors.

    · Application

    Z-Series motors are perfect for any application which requires extreme precision, smoothness, and quiet operation. Application

    Specifications

    Dimension A
    (MAX)    		 Model Number Rated Current
    (Amps/Phase)    		 Holding Torque Resistance
    (Ohms/Phase)    		 Inertia
    (oz-in²)    		 Weight
    (Lbs.)    		 Number of
    Leads
    (oz-in) (N-m)
    1.1"
    (27.9 mm)    		 Z417-11-03 1.20 12.5 0.08 2.95 0.07 0.31 4
    Z417-11-06 0.80 12.5 0.08 7.39 0.07 0.31 4
    Z417-11-09 0.80 12.5 0.08 10.21 0.07 0.31 4
    Z417-11-18 0.80 12.5 0.08 10.00 0.07 0.31 4
    1.70"
    (43.2 mm)    		 Z417-17-01 0.50 28 0.20 18.2 0.14 0.53 4
    Z417-17-02 1.40 28 0.20 3.21 0.14 0.53 4
    Z417-17-03 1.10 28 0.08 5.13 0.14 0.53 4
    Z417-17-04 0.70 28 0.08 14.00 0.14 0.53 4

    Dimensions

    Dimensions

    Torque Curves

    Z417-11-03 Z417-11-09 Z417-11-18
    Z417-17-01 Z417-17-02 Z417-17-04

    About LIN ENGINEERING

    LIN ENGINEERING was established in 1987, is the largest manufacturer of the 0.9 degree hybrid step motor in the World. Locates in Silicon Valley, USA where gathers top high-tech enterprises and talents, its' products are mainly applied in Medical instrumentation, high level security monitoring device, aerospace avionics, etc. In 2014, Lin Engineering manufactured 550 thousand pcs 0.9º hybrid stepper motors. June 3rd, 2015 – MOONS' acquired LIN ENGINEERING, INC. of Morgan Hill, CA, which is located in Silicon Valley, USA. It's a milestone that MOONS' will explore North America market further after the acquisition of Applied Motion Products in 2014.