Skip to content Skip to navigation menu

M56S-21A8ECX

 
220V AC input servo driver,rated current 1.8A, peak current 5.4A,8DI,4DO,2AI,2AO,with 26pin push-in spring I/O connector,support position control mode、velocity control mode、torque control mode、Full Closed Loop Control Mode,EtherCAT,Q Program,matching SM3 series 50W、100W、200W AC servo motor,built-in dynamic brake and STO Function Safety.
● 220V AC input
● Various of Control Mode
● High Response Frequency
● Super Tracking
● External Disturbance Compensation and Notch Filters
● High speed USB communication between Luna software and drive
● High speed USB communication between Luna software and drive
● Fully certified
Brand Name: MOONS'
Quantity:
Shipping to:
Lead Time: Contact
customer service

* Free shipping to North America and most of Europe for orders of $100 or more

Add to compare
Payment Methods

Buyer Protection:
Free Exchange if the item has quality problems within 1 year. Learn more
Parameter Unit Value
Supply Voltage 200~240VAC
Main Circuit 200~240VAC ±10%,50/60Hz
Single / Three-phase
Control Circuit 200~240VAC ±10%,50/60Hz
Single-phase
Output Current, Continuous A 1.8
Output Current, Peak A 5.4
Related Motor Output Power 50W
100W
200W
Digital Signal Input 8 Configurable optically isolate digital general inputs
Digital Signal Output 4 Configurable optically isolate digital general outputs
Analog Signal Input 2 Analog inputs
Analog Signal Output 2 Analog outputs
Pulse Signal Input NO
Pulse Signal Output NO
Encoder Output NO
Communication Ports USB
EtherCAT
Front Panel 4 keys (MODE. UP. DOWN. SET)
5 - digital LED Display
Internal Regeneration Resistor 40W
200Ω
Dynamic Brake YES
STO YES
Full Closed Loop YES
Connector Type 26pin push-in spring I/O connector
Control Modes PP
PV
TQ
CSP
CSV
CST
HM
Q Programming
Control Signal Input Alarm Reset
CW/CCW Limit
Gain Select
Zero Speed Clamp
Emergency Stop
CW/CCW Torque Limit
Speed Limit
General Purpose Input
Control Signal Output Warning Output
Fault Output
Servo-Ready
Servo-on Status
Brake Release
Velocity Reached
Torque Reached
Position Reached
Dynamic Position Error Following
Positioning Complete
Zero Speed Detected
Velocity Coincidence
Torque Coincidence
Velocity limit
Torque limit
Homing Finished
Soft Limit CW/CCW
General Purpose Output
Encoder Feedback YES
Operating temperature Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location),Storage temperature: -20°C ~ 65°C
Humidity Both operating and storage : 10 ~ 85%RH or less
Altitude Derating is not required for altitudes not higher than 1000m
Derating 1% for every additional 100m for altitudes between 1000m and 2000m
IP Rating IP20
Protection Over Current, Over Voltage,Under Voltage, Over Temperature, Bad Encoder Feedback, Over Load, Over Speed, Positon Error, STO, CW/CCW Limit, Full Closed-loop Hybrid Deviation Fault,Communication exception
Certification RoHS
CE
UL
Weight kg 0.8
Recommended Options

Filter By Product Type

All Products
CN6/CN7 Communiaction Cable
USB Configuration Cable
Regen Clamp
Encoder Output Signal Cable
Motor Types
Frame 40mm-21-bit Multi-turn Absolute Magnetic Encoder
Frame 40mm-17-bit Battery-less Multi-turn Absolute Encoder
Frame 60mm-26-bit Multi-turn Absolute Optical Encoder
Frame 60mm-21-bit Multi-turn Absolute Magnetic Encoder
Frame 60mm-17-bit Battery-less Multi-turn Absolute Encoder
Frame 40mm-26-bit Multi-turn Absolute Optical Encoder