Skip to content Skip to navigation menu
English / 日本語 / 中文 /
NEMA17 NEMA23 NEMA11 NEMA 8 NEMA14 NEMA 24 NEMA 34 0-10V DALI
  1. Home
  2. Drives
  3. Servo Drives
  4. M56S Series High-End AC Input Servo Drives
  5. M56S-24A5RD
M56S-24A5RD-1-M56S Series High-End AC Input Servo Drives
  • M56S-24A5RD-1-M56S Series High-End AC Input Servo Drives
    • M56S-24A5RD-1-M56S Series High-End AC Input Servo Drives

    • M56S-24A5RD

     
    220V AC input servo driver，rated current 4.5A， peak current 15A，10DI，6DO，2AI，with 50Pin high-density I/O connector，support position control mode、velocity control mode、torque control mode，Modbus RTU，Q Program，matching SM3 series 750W AC servo motor.
    ● 220V AC input
    ● Various of Control Mode
    ● High Response Frequency
    ● Super Tracking
    ● External Disturbance Compensation and Notch Filters
    ● High speed USB communication between Luna software and drive
    ● High speed USB communication between Luna software and drive
    ● Fully certified
    Brand Name: MOONS'
    Quantity:
    Shipping to:
    Lead Time: Contact
    customer service

    * Free shipping to North America and most of Europe for orders of $100 or more

    Add to compare
    Payment Methods

    Buyer Protection:
    Free Exchange if the item has quality problems within 1 year. Learn more
    Parameter Unit Value
    Supply Voltage 200～240VAC
    Main Circuit 200～240VAC ±10%，50/60Hz
    Single / Three-phase
    Control Circuit 200～240VAC ±10%，50/60Hz
    Single-phase
    Output Current, Continuous A 4.5
    Output Current, Peak A 15
    Related Motor Output Power 750W
    Digital Signal Input 10 Configurable optically isolate digital general inputs
    Digital Signal Output 6 Configurable optically isolate digital general outputs
    Analog Signal Input 2 Analog inputs
    Analog Signal Output NO
    Pulse Signal Input Optocoupler input: 5 ~ 24V，minimum pulse width 1μs，max. pulse frequency 500KHz
    Line Receiver input: 5V differential signal，minimum pulse width 0.125μs
    max. pulse frequency 4MHz
    Pulse Signal Output Line Driver output: Encoder A、B、Z feedback output
    Open collector output: Encoder Z phase
    Encoder Output YES
    Communication Ports USB
    RS-485
    Front Panel 4 keys (MODE. UP. DOWN. SET)
    5 - digital LED Display
    Internal Regeneration Resistor 60W
    100Ω
    Dynamic Brake NO
    STO NO
    Full Closed Loop NO
    Connector Type 50pin high density I/O connector
    Control Modes Pulse Position Mode
    Analog Velocity Mode
    Analog Torque Mode
    Internal Position Mode
    Command Torque Mode
    Internal Torque ModeInternal Velocity Mode
    Full Closed Loop Control ModeQ Programming
    Modbus RTU
    Control Signal Input Servo-ON
    Alarm Reset
    CW/CCW Limit
    Control Mode Select
    Gain Select
    Clear Position Error
    Zero Speed Clamp
    Command and Velocity input Direction control
    Command and Torque input Direction control
    Emergency Stop
    Homing Switch
    Torque Limit
    Speed Limit
    Pulse Inhibit
    Multi-velocity Switch
    Start Q Program
    General Purpose Input
    Control Signal Output Warning Output
    Fault Output
    Servo-Ready
    Servo-on Status
    Brake Release
    Velocity Reached
    Torque Reached
    Position Reached
    Dynamic Position Error Following
    Positioning Complete
    Zero Speed Detected
    Velocity Coincidence
    Torque Coincidence
    Velocity limit
    Torque limit
    Homing Finished
    Soft Limit CW/CCW
    General Purpose Output
    Encoder Feedback YES
    Operating temperature Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location),Storage temperature: -20°C ~ 65°C
    Humidity Both operating and storage : 10 ~ 85%RH or less
    Altitude Derating is not required for altitudes not higher than 1000m
    Derating 1% for every additional 100m for altitudes between 1000m and 2000m
    IP Rating IP20
    Protection Over Current, Over Voltage,Under Voltage, Over Temperature, Bad Encoder Feedback, Over Load, Over Speed, Positon Error, STO, CW/CCW Limit, Full Closed-loop Hybrid Deviation Fault,Communication exception
    Certification RoHS
    CE
    UL
    Weight kg 1.6
    Recommended Options

    Filter By Product Type

    All Products
    Motor Types
    Frame 80mm-26-bit Multi-turn Absolute Optical Encoder
    Frame 80mm-17-bit Battery-less Multi-turn Absolute Encoder
    Frame 80mm-21-bit Multi-turn Absolute Magnetic Encoder
    Regen Clamp
    USB Configuration Cable
    CN6/CN7 Communiaction Cable