* Free shipping to North America and most of Europe for orders of $100 or more
ID BLD Plus Series Brushless DC Drivers
Input voltage: 24-48VDC, supports external analog speed regulation, switch input multi-stage speed regulation, communication command speed regulation, speed control range can reach 150-8000r/min, speed change rate (with load) is ± 0.25%, supports speed loop, current loop double closed-loop control, realizes low temperature rise, low noise, low vibration, low positioning torque and twice overload torque output, supports RS-485 or CANopen communication control. The EMC electromagnetic compatibility can reach medical level.
● Medical grade EMC compatible
● Support dynamic braking function
● Wide speed range: up to 8000RPM
● Speed change rate (with load) is ± 0.25%
● Support CANopen or RS485 communication control
● Set speed through external analog or digital signals
● Overload limit output torque protection function ● Small size, compact structure
● Support dynamic braking function
● Wide speed range: up to 8000RPM
● Speed change rate (with load) is ± 0.25%
● Support CANopen or RS485 communication control
● Set speed through external analog or digital signals
● Overload limit output torque protection function ● Small size, compact structure
Brand Name: MOONS'
Payment Methods
Buyer Protection:
Free Exchange 
- current tab: Description & Feature
- Data Sheet
- Online Ordering
- Dimension
- Downloads
- Recommended Options
- Delivery & Packaging
■ Features
Low Voltage DC Input
▪ Input Voltage: 24-48VDCExcellent Velocity Stability
▪ Upgrade speed control algorithm to improve system robustness ▪ Speed control range 1rpm to rated speed, speed control accuracy 1rpm
Support Dual Closed-loop Control
IO Resources
▪ 8 digital inputs▪ 2 digital outputs
▪ 11 analog input
200% Over Torque Output
Various Velocity Control Mode
▪ External analog velocity control ▪ Multi-velocity control by digital input
▪ SCL commanded velocity control
Performance
▪ EMC can reach medical grade level ▪ Enhance the anti-static and anti-interference ability of the feedback signal, and upgrade the contact discharge to 6KV
▪ Compared to the previous generation, the heat generation is reduced by 50% and the efficiency is higher
▪ Upgraded square wave and sine wave control algorithms, compatible with various brushless motor applications
▪ Multi-bus communication, supporting RS-485, CANopen and Profinet communication methods
■ System Configuration
■ Drive Part Numbering
■ Motor Part Numbering
■ Features
□ Electrical Specifications
| Product Model | BLD-10-R-H | BLD-10-C-H |
|---|---|---|
| Structure size (mm) | 118*74*28 | |
| Continuous output A (rms) | 10A | |
| Maximum output current A (rms) | 20A | |
| Main circuit power supply | 18~60VDC | |
| Typical power supply voltage | 24 or 60VDC | |
| Insulation voltage | Primary to ground: withstand voltage 500VDC, 1 min | |
| Cooling method | Natural cooling | |
□ General specifications (BLD10-R-H/BLD10-C-H)
| Usage Environment | Temperature | Ambient temperature: 0°C ~ 55°C (If the ambient temperature of servo drive is higher than 45°C, please install the drive in a well-ventilated location) Storage temperature: -20°C ~ 70°C | |
|---|---|---|---|
| Humidity | Both operating and storage : 10 ~ 85%RH or less | ||
| Altitude | Derating is not required for altitudes not higher than 1000m Derating 1% for every additional 100m for altitudes between 1000m and 2000m | ||
| Vibration | 9.8m/s2 or less, 10 ~ 60Hz (Do not use continuously at resonance frequency) | ||
| I/O | Digital Signal | 输入 | 8 8 digital signal inputs: Opto-isolated, single-ended input, supports NPN and PNP connections, 5~24 VDC, minimum pulse width 50μs, maximum pulse frequency 5kHz |
| Output | 2 digital signal outputs: Optoelectronic isolation, open collector, maximum withstand voltage 30V, maximum current 100mA, maximum pulse frequency 1kHz | ||
| Analog Signal | Input | 1 Analog input, 0～5V, 12bit | |
| Communication | RS-485 | Modbus/RTU protocol communication (supported by -R series) | |
| Status Indicator | Red, Green LED | ||
| Protection | Overcurrent, overvoltage, undervoltage, overtemperature, overload, speed limit, emergency stop, communication abnormality, power reverse protection, phase loss protection, save failure | ||
■ Interface Function Table
| Product Number | BLD-10-R-H | BLD-10-C-H | |
|---|---|---|---|
| Control Mode | Velocity Mode | √ | √ |
| Interface | 8 Digital Inputs | √ | √ |
| 2 Digital Outputs | √ | √ | |
| 1 Analog Inputs | √ | √ | |
| Communication Interface | CANopen | - | √ |
| RS-485 | √ | - | |
■ Accessories
□ Motor extension cable
| Model | Length |
|---|---|
| 4201-100 | 1m |
| 4201-300 | 3m |
□ I/O Control Cable P/N 1201-030
□ Communication Cable
| Model | length(L) |
|---|---|
| 3004-313-1M | 1m |
| 3004-313-3M | 3m |
□ Networking Cable
| Model | length(L) |
|---|---|
| 2111-050 | 0.5m |
| 2111-100 | 1m |
| 2111-300 | 3m |
| 2111-500 | 5m |
■ Dimensions (Unit: mm)
2D Drawings
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| BLD10-R-H-2D.pdf | 244 | ||
| BLD10-C-H-2D.pdf | 244 |
3D Model
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| BLD10-R-H-3D.stp | STEP | 4835 | |
| BLD10-C-H-3D.stp | STEP | 4954 |
Software
| Title | Type | Size（KB） | Download |
|---|---|---|---|
| BLD Configurator Setup 1.0.24.1102.zip | ZIP | 904 |
Filter By Product Type
All ProductsExtended I/O Cables
Extended Motor Cables
Communiaction Cable
Motor Types
Regen Clamp
RS485 Adapter
Delivery & Packaging
Ensure your ordered products are always safely packaged from easy click to fast delivery to your handsProfessional Product Label
Considering all possible harsh application environments, MOONS' specially designed labels for each product, which pass water-resistance test, durability rub test, high temperature resistance and corrosion resistance tests.Besides, our product labels are attached with QR code linking to product details, which is convenient for clients to view the detail product page with their mobile phones.
Note: This label design is suitable for products of stepper motor.
(Professional packing box and unique appearance design)
(Single item packed with EPE)
(Multi-products packed with another box)
Safely Packaging
In order to ensure your shipments withstand the long trip and arrive safely and intact, MOONS' specially designed Individual package to pass the drop test with its stable structure.Besides，the package is made from recyclable materials, providing you with professional safety delivery.
Whether just single item or multi-products the clients buy, all products are packed twice to avoid the damage further.
Shipping Visualization
For each case, products are carefully packed by experienced warehouse staff and the key processes are recorded by photos, which are then posted on our website, so that clients could clearly know the packing process and logistics status after placing order.
(Product in the box)
(Add the invoice)
(Label the commodity)
(The logistics waybill attached)
Fast Delivery
Fast Cross-Border DeliveryMOONS' chooses DHL as our main international express shipping partner. As the world's leading logistics specialist, DHL provides our customers with fast and professional inter- national door-to-door delivery service.
Estimated Delivery Time: e.g. China-USA major cities 3 business days.
Professional
Warehouse Management
